Chamunda Engineering Solutions
Ahmedabad, Gujarat
GST No. 24APYPB0504M1ZV
TrustSEAL Verified
Call 08047630685 91% Response Rate
SEND EMAIL
Product Details:
| Minimum Order Quantity | 100 Piece |
| Size | 1/2 inch (15mm) |
| Duty Type | Medium Duty |
| End Connection | Male x Female |
| Body Material | Brass |
| Thread Type | BSP |
| Handle Type | Lever Handle |
| Pressure Rating | 0–10 bar |
| Ball Material | Chrome Plated Brass |
| Application | Oil, Air, Water, Gas |
| Seal Material | PTFE |
| Port Size | 3/8 inch |
Size (bore / thread): Ensure the valve’s nominal diameter or thread type (BSP, NPT, etc.) matches your pipeline/fittings.
Pressure rating: Make sure the valve’s pressure rating is adequate for your system (especially if operating under pressure or with gases).
Seat/seal material: PTFE seats are common and versatile, but if chemical compatibility or higher temperature/pressure is needed, confirm seat/seal material.
Corrosion & media compatibility: SS 304 works well for water, air, general chemicals — but verify media (oil, aggressive chemicals, gas type) is compatible.
Space constraints: Mini valves are chosen when space is tight — but ensure there’s enough clearance for lever operation and maintenance.
Thread/connection type: Female or male threaded, NPT/BSP — must match your pipe/fitting standard.
Additional Information:
Product Details:
| Minimum Order Quantity | 100 Piece |
| Valve Size | 1/2 |
| Brand | CESON |
| Media | Water, Air |
| Usage/Application | Water |
| Place Of Origin | INDIA |
| Pressure | 10 |
| Material | BRASS |
| Model Name/Number | CESON |
Chamunda Engineering Solutions offers a wide range of high-quality Brass Ball Valves, designed for smooth and reliable control of water, air, gas, and other non-corrosive fluids. These valves are widely used in residential, commercial, and industrial applications due to their strength, compact design, and excellent resistance to pressure and temperature.
Manufactured using premium-grade forged or cast brass, our Brass Ball Valves ensure tight shut-off, long service life, and maintenance-free performance in both low- and high-pressure systems.
Key Features:Full bore and reduced bore designs available
Corrosion-resistant brass body with chrome-plated ball
Easy quarter-turn operation for quick shut-off
Leak-proof PTFE seats and seals
Sizes: 1/4” to 4” (DN8 to DN100)
Working pressure: Up to 600 PSI
Suitable for water, oil, air, gas, and general-purpose applications
Plumbing and water supply systems
Compressed air systems
Fuel and gas pipelines
HVAC and industrial automation
Agricultural irrigation setups
Chamunda Engineering Solutions ensures every Brass Ball Valve undergoes strict quality checks for durability, pressure testing, and leakage prevention. Whether you need threaded, flanged, or compression-type connections, we provide the right solution for your system requirements.
Types Available:Two-way and three-way Brass Ball Valves
Male x Female, Female x Female, and compression ends
Lever handle or butterfly handle options
Lockable and mini ball valve versions
High-quality manufacturing with ISO compliance
Competitive pricing and reliable availability
Customizable options to suit any piping system
Trusted supplier of Brass Ball Valves across India and export markets
For strong, dependable, and maintenance-free Brass Ball Valves, trust Chamunda Engineering Solutions – your reliable partner for superior flow control products.
Additional Information:
Product Details:
| Minimum Order Quantity | 100 Piece |
| Size | 3/4 inch (20mm) |
| Duty Type | Medium Duty |
| Media | Air |
| End Connection | Female x Female |
| Handle Type | Lever Handle |
| Ball Material | Brass |
| Connector Type | Screwed |
| Port Size | 1" |
| Body Material | Forged Brass |
| Bore Type | Full Bore |
| Pressure Rating | PN 25 |
| Packaging Type | BOX PACK |
| Temperature Of Media | Medium Temperature, Low Temperature |
Brass Ball Valves – Durable & Leak-Proof Flow Control by Chamunda Engineering Solutions
Chamunda Engineering Solutions offers a wide range of high-quality Brass Ball Valves, designed for smooth and reliable control of water, air, gas, and other non-corrosive fluids. These valves are widely used in residential, commercial, and industrial applications due to their strength, compact design, and excellent resistance to pressure and temperature.
Manufactured using premium-grade forged or cast brass, our Brass Ball Valves ensure tight shut-off, long service life, and maintenance-free performance in both low- and high-pressure systems.
Key Features:
Full bore and reduced bore designs available
Corrosion-resistant brass body with chrome-plated ball
Easy quarter-turn operation for quick shut-off
Leak-proof PTFE seats and seals
Sizes: 1/4” to 4” (DN8 to DN100)
Working pressure: Up to 600 PSI
Suitable for water, oil, air, gas, and general-purpose applications
Applications:
Plumbing and water supply systems
Compressed air systems
Fuel and gas pipelines
HVAC and industrial automation
Agricultural irrigation setups
Chamunda Engineering Solutions ensures every Brass Ball Valve undergoes strict quality checks for durability, pressure testing, and leakage prevention. Whether you need threaded, flanged, or compression-type connections, we provide the right solution for your system requirements.
Types Available:
Two-way and three-way Brass Ball Valves
Male x Female, Female x Female, and compression ends
Lever handle or butterfly handle options
Lockable and mini ball valve versions
Why Choose Chamunda Engineering Solutions?
High-quality manufacturing with ISO compliance
Competitive pricing and reliable availability
Customizable options to suit any piping system
Trusted supplier of Brass Ball Valves across India and export markets
For strong, dependable, and maintenance-free Brass Ball Valves, trust Chamunda Engineering Solutions – your reliable partner for superior flow control products.
Additional Information:
Product Details:
| Minimum Order Quantity | 100 Piece |
| Material | Brass |
| Body Material | Bronze |
| End Connection | SCREW END |
| Port Size | 1/2 |
| Pressure Rating | PN25 |
| Standard | BS |
| Application | Gas Line |
| Pressure | 16 |
| Color | BRAS |
| Temperature | 180 |
| Rating | 1.5 |
| Media | Water, Oil, Gas |
| Grade | BRASS |
| Operation | Handwheel |
| Size | 20 mm |
| Valve Size | 15 mm |
Brass Gate Valve – Durable Flow Control by Chamunda Engineering Solutions
Chamunda Engineering Solutions offers a reliable and cost-effective range of Brass Gate Valves designed for precise shut-off in plumbing, irrigation, gas, and industrial fluid systems. These valves are ideal for low to medium pressure applications and are known for their strength, corrosion resistance, and long service life.
Crafted from high-quality forged or cast brass, our Brass Gate Valves provide smooth operation with minimal pressure drop and excellent sealing performance, making them suitable for both residential and industrial use.
Key Features:
Solid brass construction for corrosion resistance and durability
Rising and non-rising stem designs available
Full port design for unrestricted flow
Threaded ends (BSP/NPT) for easy installation
Sizes available: 1/2" to 4"
Working pressure: up to 16 bar (230 PSI)
Manual handwheel operation with clear open/close indication
Applications:
Plumbing and water distribution systems
HVAC and cooling systems
Industrial and commercial piping
Agricultural and irrigation setups
Air, gas, oil, and non-corrosive fluid handling
Chamunda Engineering Solutions ensures that every Brass Gate Valve is tested for pressure, sealing, and durability to meet global quality standards. These valves offer a dependable and long-term solution for your flow control needs.
Why Choose Chamunda Engineering Solutions?
ISO-certified quality and manufacturing standards
Wide range of valve sizes and connection options
Customizable designs available on request
Trusted supplier of Brass Gate Valves across India and overseas
When you need tough, reliable, and affordable flow control, trust Chamunda Engineering Solutions for premium Brass Gate Valves that perform under pressure.
Additional Information:
Product Details:
| Minimum Order Quantity | 5 Piece |
| Size | 1/2 inch |
| Port Type | Single Passage |
| Speed | >1000 RPM |
| Material | Stainless Steel |
| Body Material | Stainless Steel |
| Seal Material | PTFE |
| Max Pressure | up to 10 bar |
| Brand | CESON |
| Pressure | 10 |
| Max Speed | up to 1000 rpm |
| Temperature | 100 |
| Connection Standard | BSP |
| Media | Oil |
| Medium | Steam |
Roto Seal Coupling – Reliable Rotary Fluid Transfer by Chamunda Engineering Solutions
Chamunda Engineering Solutions offers high-quality Roto Seal Couplings, designed for leak-proof rotary connections in systems where fluids or gases are transferred between stationary and rotating parts. These couplings are essential in applications involving rotating drums, spindles, cylinders, or rolls.
Our Roto Seal Couplings are manufactured using precision engineering and top-grade materials like Brass, Stainless Steel, and Carbon Steel, ensuring long service life, resistance to corrosion, and smooth 360° rotation even under high pressure and temperature.
Key Features:
Leak-proof rotary connection for air, oil, water, steam, or hydraulic fluids
360° swivel movement with smooth operation
Single and double flow passage types available
Pressure handling capacity up to 10,000 PSI (based on design)
Temperature resistance up to 200°C
Threaded, flanged, or custom end connections available
Applications:
Rotating hydraulic or pneumatic cylinders
Printing and paper industries
Steel and textile mills
Injection molding machines
Food and pharmaceutical processing machinery
Chamunda Engineering Solutions ensures that each Roto Seal Coupling is rigorously tested for sealing performance, pressure integrity, and rotational smoothness. Our couplings are trusted for their durability and compatibility with a wide range of fluids and gases.
Types Available:
Single Passage Roto Seal Coupling
Dual Passage Roto Seal Coupling
High-Pressure Roto Seal Coupling
Stainless Steel Roto Seal for corrosive media
Why Choose Chamunda Engineering Solutions?
ISO-certified manufacturing process
Custom designs available for unique operating conditions
Competitive pricing with consistent quality
Trusted supplier of Roto Seal Couplings across India and international markets
For smooth, safe, and maintenance-free rotary connections, rely on Chamunda Engineering Solutions – your trusted partner for premium Roto Seal Coupling solutions.
Additional Information:
Product Details:
| Minimum Order Quantity | 50 Piece |
| Valve Size | 15 mm (1/2 inch) |
| Material | Stainless Steel |
| End Connection | Screwed |
| Pressure Rating | 400 |
| End Connection Type | Screwed |
| Automation Grade | Manual |
| Maximum Pressure | 400KG |
| Color | SILVER |
| Media | Air |
| Application | AIR |
| Surface Finish | YES |
| Maximum Temperature | 180 |
| Packaging Type | YES |
| Material Grade | SS 304 |
| No. Of Hole | 2 HOLE |
| Type Of Connector | NO |
| Ball Type | YES |
| Gland Ring | YES |
| Ball Seal | YES |
| Body Seal | YES |
Additional Information:
Product Details:
| Minimum Order Quantity | 500 Piece |
| End Connection | SCREW END |
| Body Material | Stainless Steel |
| Port Size | 1/4" |
| Material | SS 304 |
| Pressure | 16KG |
| Thread Type | BSP |
| Pressure Rating | 0–25 bar |
| Handle Type | T handle |
| Valve Size | 1/4 inch |
| Temperature Range | 180 |
| Style | ROUND |
| Application | Air |
| Seal Material | PTFE |
| Product Type | INDIAN |
Mini Ball Valve – Compact & Reliable Flow Control by Chamunda Engineering Solutions
Chamunda Engineering Solutions offers a premium selection of Mini Ball Valves designed for compact installations where space is limited but reliable shut-off is essential. These valves are ideal for low to medium pressure applications involving air, water, gas, fuel, and other non-corrosive fluids.
Crafted from high-quality materials such as Brass, Stainless Steel, and Nickel-Plated Brass, our Mini Ball Valves offer long-lasting performance, smooth operation, and leak-proof sealing in compact piping systems.
Key Features:Compact design for space-saving installations
1/4-turn operation for quick shut-off/on
Sizes available: 1/8” to 1” BSP/NPT
Body materials: Brass, SS 304, SS 316
PTFE seats and seals for leak-free performance
Corrosion-resistant and maintenance-free
Pneumatic control systems
Air compressor lines
Fuel and gas pipelines
Laboratory and instrumentation equipment
Domestic water supply and plumbing
Chamunda Engineering Solutions ensures every Mini Ball Valve is tested for pressure resistance, durability, and precision. Whether used in industrial equipment or residential setups, our valves are engineered for long service life and dependable flow control.
Why Choose Chamunda Engineering Solutions?High-quality material and precision-machined components
ISO-certified manufacturing standards
Custom options available for end connections and body type
Trusted supplier of Mini Ball Valves across India and export markets
For compact, durable, and efficient Mini Ball Valves, choose Chamunda Engineering Solutions – your reliable partner in high-quality flow control solutions.
Additional Information:
Product Details:
| Minimum Order Quantity | 50 Piece |
| Port Size | 1/2 inch |
| End Connection | Male Thread |
| Body Material | Brass |
| Material | BRASS |
| Pressure | 10 |
| Thread Type | BSP |
| Pressure Rating | 0–10 bar |
| Handle Type | Lever |
| Connector Type | Screwed |
| Media | Air |
| Valve Size | 1/2 inch |
| Application | Air |
| Seal Material | PTFE |
| Temperature Of Media | Medium Temperature |
Mini Ball Valve – Compact & Reliable Flow Control by Chamunda Engineering Solutions
Chamunda Engineering Solutions offers a premium selection of Mini Ball Valves designed for compact installations where space is limited but reliable shut-off is essential. These valves are ideal for low to medium pressure applications involving air, water, gas, fuel, and other non-corrosive fluids.
Crafted from high-quality materials such as Brass, Stainless Steel, and Nickel-Plated Brass, our Mini Ball Valves offer long-lasting performance, smooth operation, and leak-proof sealing in compact piping systems.
Key Features:
Compact design for space-saving installations
1/4-turn operation for quick shut-off/on
Sizes available: 1/8” to 1” BSP/NPT
Body materials: Brass, SS 304, SS 316
PTFE seats and seals for leak-free performance
Corrosion-resistant and maintenance-free
Applications:
Pneumatic control systems
Air compressor lines
Fuel and gas pipelines
Laboratory and instrumentation equipment
Domestic water supply and plumbing
Chamunda Engineering Solutions ensures every Mini Ball Valve is tested for pressure resistance, durability, and precision. Whether used in industrial equipment or residential setups, our valves are engineered for long service life and dependable flow control.
Why Choose Chamunda Engineering Solutions?
High-quality material and precision-machined components
ISO-certified manufacturing standards
Custom options available for end connections and body type
Trusted supplier of Mini Ball Valves across India and export markets
For compact, durable, and efficient Mini Ball Valves, choose Chamunda Engineering Solutions – your reliable partner in high-quality flow control solutions.
Additional Information:
Product Details:
| Minimum Order Quantity | 100 Piece |
| Size | 1/2 inch (15mm), 3/4 inch |
| Duty Type | Medium Duty |
| Media | Water |
| Connector Type | Screwed |
| Pressure | Medium Pressure |
| Port Size | 3/4" |
| Packaging Type | BOX PACK |
Chamunda Engineering Solutions offers a wide range of high-quality Brass Ball Valves, designed for smooth and reliable control of water, air, gas, and other non-corrosive fluids. These valves are widely used in residential, commercial, and industrial applications due to their strength, compact design, and excellent resistance to pressure and temperature.
Manufactured using premium-grade forged or cast brass, our Brass Ball Valves ensure tight shut-off, long service life, and maintenance-free performance in both low- and high-pressure systems.
Key Features:Full bore and reduced bore designs available
Corrosion-resistant brass body with chrome-plated ball
Easy quarter-turn operation for quick shut-off
Leak-proof PTFE seats and seals
Sizes: 1/4” to 4” (DN8 to DN100)
Working pressure: Up to 600 PSI
Suitable for water, oil, air, gas, and general-purpose applications
Plumbing and water supply systems
Compressed air systems
Fuel and gas pipelines
HVAC and industrial automation
Agricultural irrigation setups
Chamunda Engineering Solutions ensures every Brass Ball Valve undergoes strict quality checks for durability, pressure testing, and leakage prevention. Whether you need threaded, flanged, or compression-type connections, we provide the right solution for your system requirements.
Types Available:Two-way and three-way Brass Ball Valves
Male x Female, Female x Female, and compression ends
Lever handle or butterfly handle options
Lockable and mini ball valve versions
High-quality manufacturing with ISO compliance
Competitive pricing and reliable availability
Customizable options to suit any piping system
Trusted supplier of Brass Ball Valves across India and export markets
For strong, dependable, and maintenance-free Brass Ball Valves, trust Chamunda Engineering Solutions – your reliable partner for superior flow control products.
Additional Information:
Product Details:
| Minimum Order Quantity | 250 Piece |
| Valve Size | 1/2 inch |
| Material | Stainless Steel |
| Pressure | 3000 PSI |
| Brand | Ceson |
| Usage/Application | Air |
| End Connection | BSP |
| Country of Origin | Made in India |
Product Details:
| Minimum Order Quantity | 500 Piece |
| Valve Size | 1/2 inch |
| Material | SS 304 |
| Pressure | 40 |
| End Connection | SCREW END |
| Temperature Range | 180 |
| Style | ROUND |
| Power | YES |
| Product Type | YES |
| Port Size | 15MM |
Mini Ball Valve – Compact & Reliable Flow Control by Chamunda Engineering Solutions
Chamunda Engineering Solutions offers a premium selection of Mini Ball Valves designed for compact installations where space is limited but reliable shut-off is essential. These valves are ideal for low to medium pressure applications involving air, water, gas, fuel, and other non-corrosive fluids.
Crafted from high-quality materials such as Brass, Stainless Steel, and Nickel-Plated Brass, our Mini Ball Valves offer long-lasting performance, smooth operation, and leak-proof sealing in compact piping systems.
Key Features:Compact design for space-saving installations
1/4-turn operation for quick shut-off/on
Sizes available: 1/8” to 1” BSP/NPT
Body materials: Brass, SS 304, SS 316
PTFE seats and seals for leak-free performance
Corrosion-resistant and maintenance-free
Pneumatic control systems
Air compressor lines
Fuel and gas pipelines
Laboratory and instrumentation equipment
Domestic water supply and plumbing
Chamunda Engineering Solutions ensures every Mini Ball Valve is tested for pressure resistance, durability, and precision. Whether used in industrial equipment or residential setups, our valves are engineered for long service life and dependable flow control.
Why Choose Chamunda Engineering Solutions?High-quality material and precision-machined components
ISO-certified manufacturing standards
Custom options available for end connections and body type
Trusted supplier of Mini Ball Valves across India and export markets
For compact, durable, and efficient Mini Ball Valves, choose Chamunda Engineering Solutions – your reliable partner in high-quality flow control solutions.
Additional Information:
Product Details:
| Minimum Order Quantity | 10 piece |
| Size | 1/2" |
| Usage/Application | Water |
| Pressure | Medium Pressure |
| Connector Type | Screwed |
| Model Name/Number | CESON |
| Brand | CESON |
| Material | SS |
| Design | Screw End |
Established in 2010, in Ahmedabad Moisture Separator in India (Gujarat, India), we, “Chamunda Engineering Solutions”, are a renowned manufacturer and supplier of high quality Industrial Valve, Moisture Separator, Quick Release Coupling, Cam Lock Coupling, Pneumatic Fitting, Hydraulic Fitting, etc. Today, in this most competitive stage no company is going to compromise with the word “Quality”. We believe same while providing our products to our clients. We are expert in the field of making Industrial Valves & Fittings and regularly satisfy its demands in Oil, Gas, Power, & Pharma sector industries to meet their bottom line goals. Our valves are specialized for Oil & Gas sector industries and proved our Quality by supplying major oil industries. The complete product range offered by us is manufactured using quality tested raw material in compliance with defined standards. Our product array is highly appreciated for the features like high strength, dimensional accuracy, easy installation, corrosion resistance and durability. We also make available these products in several specifications as per the needs of the clients. We are providing our products with brand name Ceson.
Additional Information:
Product Details:
| Minimum Order Quantity | 50 Piece |
| End Connection | BSP |
| Material | BRASS |
| Pressure | 10 |
| Media | Water |
| Valve Size | 1/4 inch |
| Style | ROUND |
| WOG Rating | 150 |
| Temperature Of Media | Medium Temperature |
Mini Ball Valve – Compact & Reliable Flow Control by Chamunda Engineering Solutions
Chamunda Engineering Solutions offers a premium selection of Mini Ball Valves designed for compact installations where space is limited but reliable shut-off is essential. These valves are ideal for low to medium pressure applications involving air, water, gas, fuel, and other non-corrosive fluids.
Crafted from high-quality materials such as Brass, Stainless Steel, and Nickel-Plated Brass, our Mini Ball Valves offer long-lasting performance, smooth operation, and leak-proof sealing in compact piping systems.
Key Features:
Compact design for space-saving installations
1/4-turn operation for quick shut-off/on
Sizes available: 1/8” to 1” BSP/NPT
Body materials: Brass, SS 304, SS 316
PTFE seats and seals for leak-free performance
Corrosion-resistant and maintenance-free
Applications:
Pneumatic control systems
Air compressor lines
Fuel and gas pipelines
Laboratory and instrumentation equipment
Domestic water supply and plumbing
Chamunda Engineering Solutions ensures every Mini Ball Valve is tested for pressure resistance, durability, and precision. Whether used in industrial equipment or residential setups, our valves are engineered for long service life and dependable flow control.
Why Choose Chamunda Engineering Solutions?
High-quality material and precision-machined components
ISO-certified manufacturing standards
Custom options available for end connections and body type
Trusted supplier of Mini Ball Valves across India and export markets
For compact, durable, and efficient Mini Ball Valves, choose Chamunda Engineering Solutions – your reliable partner in high-quality flow control solutions.
Additional Information:
Product Details:
| Minimum Order Quantity | 10 Piece |
| Valve Size | 1/2 inch |
| Material | MS |
| Pressure | 500 |
| Design | SCREW |
| Usage/Application | HYDRAULIC |
| End Connection | THREAD |
| Power | YES |
| Country of Origin | Made in India |
A Hydraulic Ball Valve is a quarter-turn shut-off valve used to control or isolate the flow of hydraulic oil or other pressurized fluids in industrial systems.
It’s designed for high-pressure applications, ensuring tight sealing, durability, and easy operation even under demanding conditions.
| Parameter | Details |
|---|---|
| Type | 2-Way / 3-Way Ball Valve |
| Operation | Quarter-turn manual (lever operated) or pneumatic/electric actuated |
| Body Material | Carbon Steel / Mild Steel / Stainless Steel (SS-304 / SS-316) |
| Ball & Stem Material | Hardened Stainless Steel / Chrome-Plated Steel |
| Seal Material | PTFE (Teflon), NBR, or Viton |
| Working Pressure | Up to 500 bar (depending on model & size) |
| Temperature Range | –20°C to +120°C |
| Port Size | ¼", ⅜", ½", ¾", 1", 1¼", 1½", 2" BSP / NPT |
| Connection Type | BSP / NPT Threaded, Flanged, or Socket Weld |
| Flow Direction | Bi-directional (Full Bore) |
| Handle Type | Lever / Lockable Handle (for safety) |
| Design Standard | ISO 5789, DIN 3202, or equivalent |
Additional Information:
Product Details:
| Minimum Order Quantity | 25 Piece |
| Port Size | 1/4 inch |
| Valve Size | 1/4 inch |
| End Connection | SCREW |
| Body Material | Stainless Steel |
| Material | SS 304 |
| Pressure | 40 KG |
| Thread Type | BSP |
| Pressure Rating | 0–25 bar |
| Handle Type | T handle |
| Temperature Range | 100 |
| Application | Water, Gas, Oil, Air |
| Seal Material | PTFE |
| Country of Origin | Made in India |
| MEDIA | AIR |
Size (bore / thread): Ensure the valve’s nominal diameter or thread type (BSP, NPT, etc.) matches your pipeline/fittings.
Pressure rating: Make sure the valve’s pressure rating is adequate for your system (especially if operating under pressure or with gases).
Seat/seal material: PTFE seats are common and versatile, but if chemical compatibility or higher temperature/pressure is needed, confirm seat/seal material.
Corrosion & media compatibility: SS 304 works well for water, air, general chemicals — but verify media (oil, aggressive chemicals, gas type) is compatible.
Space constraints: Mini valves are chosen when space is tight — but ensure there’s enough clearance for lever operation and maintenance.
Thread/connection type: Female or male threaded, NPT/BSP — must match your pipe/fitting standard.
Additional Information:
Product Details:
| Minimum Order Quantity | 2 Piece |
| End Connection Type | Lugged |
| Operation Type | Manual |
| Material | WCB |
| Flow Direction | Uni-Directional |
| Size | 10 |
| Finish | METAL |
| End Configurations | 150 |
| Manufacturing Standard | YES |
| Testing Standard | YES |
| Country of Origin | Made in India |
Knife Edge Gate Valve – Rugged & Reliable Flow Control by Chamunda Engineering Solutions
Chamunda Engineering Solutions offers high-quality Knife Edge Gate Valves designed for tough, slurry-handling applications where conventional gate or globe valves fail. Built for precision and durability, these valves are ideal for shut-off and isolation in pipelines carrying viscous fluids, slurry, pulp, powders, and fibrous materials.
Manufactured using robust materials like Cast Iron, Stainless Steel, and Carbon Steel, our Knife Edge Gate Valves are engineered to deliver long-term, leak-free performance even in the most demanding industrial environments.
Key Features:
Unidirectional or bidirectional flow control
Compact design with minimum pressure drop
Sharp-edged gate cuts through thick media easily
Zero leakage shut-off with soft or metal seated options
Available with manual, pneumatic, electric, or hydraulic actuators
Sizes: 2" to 36" (DN50–DN900) and pressure ratings up to PN 40
Applications:
Mining and Mineral Processing
Paper and Pulp Industries
Chemical and Petrochemical Plants
Wastewater Treatment Plants
Food, Beverage, and Bulk Material Handling
Chamunda Engineering Solutions ensures that every Knife Edge Gate Valve is manufactured under strict quality control for high performance, reliability, and corrosion resistance. We offer custom designs based on application needs, including rising stem, non-rising stem, and bonneted or bonnetless options.
Why Choose Chamunda Engineering Solutions?
Superior material and machining quality
Precision manufacturing and hydro testing
Customization for size, material, and end connections
Trusted supplier across India and global markets
If you're seeking high-performance Knife Edge Gate Valves built to withstand tough industrial conditions, Chamunda Engineering Solutions is your dependable partner for quality and reliability.
Additional Information:
Product Details:
| Minimum Order Quantity | 100 Piece |
| Size | 1/4 inch (8mm), 1/2 inch |
| Duty Type | Medium Duty |
| Media | Air |
| Connector Type | Screwed |
| Pressure | Low Pressure |
| Operating Temperature | up to 80 degree C |
| Port Size | 1/2" |
| Operating Pressure | up to 20 Kg/ cm.sq. |
| Packaging Type | BOX PACK |
| Temperature Of Media | Medium Temperature |
Chamunda Engineering Solutions offers a wide range of high-quality Brass Ball Valves, designed for smooth and reliable control of water, air, gas, and other non-corrosive fluids. These valves are widely used in residential, commercial, and industrial applications due to their strength, compact design, and excellent resistance to pressure and temperature.
Manufactured using premium-grade forged or cast brass, our Brass Ball Valves ensure tight shut-off, long service life, and maintenance-free performance in both low- and high-pressure systems.
Key Features:Full bore and reduced bore designs available
Corrosion-resistant brass body with chrome-plated ball
Easy quarter-turn operation for quick shut-off
Leak-proof PTFE seats and seals
Sizes: 1/4” to 4” (DN8 to DN100)
Working pressure: Up to 600 PSI
Suitable for water, oil, air, gas, and general-purpose applications
Plumbing and water supply systems
Compressed air systems
Fuel and gas pipelines
HVAC and industrial automation
Agricultural irrigation setups
Chamunda Engineering Solutions ensures every Brass Ball Valve undergoes strict quality checks for durability, pressure testing, and leakage prevention. Whether you need threaded, flanged, or compression-type connections, we provide the right solution for your system requirements.
Types Available:Two-way and three-way Brass Ball Valves
Male x Female, Female x Female, and compression ends
Lever handle or butterfly handle options
Lockable and mini ball valve versions
High-quality manufacturing with ISO compliance
Competitive pricing and reliable availability
Customizable options to suit any piping system
Trusted supplier of Brass Ball Valves across India and export markets
For strong, dependable, and maintenance-free Brass Ball Valves, trust Chamunda Engineering Solutions – your reliable partner for superior flow control products.
Additional Information:
Product Details:
| Minimum Order Quantity | 100 Piece |
| Valve Size | 1/2 inch |
| Media | Air |
| Operating Pressure | 25 Kg/ cm.sq. |
| Operating Temperature | 150 degree C |
| Surface Finish | METAL |
| Connector Type | SCREW |
| Automation Grade | Manual |
| Usage/Application | AIR WATER GAS |
| Country of Origin | Made in India |
Chamunda Engineering Solutions offers a wide range of high-quality Brass Ball Valves, designed for smooth and reliable control of water, air, gas, and other non-corrosive fluids. These valves are widely used in residential, commercial, and industrial applications due to their strength, compact design, and excellent resistance to pressure and temperature.
Manufactured using premium-grade forged or cast brass, our Brass Ball Valves ensure tight shut-off, long service life, and maintenance-free performance in both low- and high-pressure systems.
Key Features:Full bore and reduced bore designs available
Corrosion-resistant brass body with chrome-plated ball
Easy quarter-turn operation for quick shut-off
Leak-proof PTFE seats and seals
Sizes: 1/4” to 4” (DN8 to DN100)
Working pressure: Up to 600 PSI
Suitable for water, oil, air, gas, and general-purpose applications
Plumbing and water supply systems
Compressed air systems
Fuel and gas pipelines
HVAC and industrial automation
Agricultural irrigation setups
Chamunda Engineering Solutions ensures every Brass Ball Valve undergoes strict quality checks for durability, pressure testing, and leakage prevention. Whether you need threaded, flanged, or compression-type connections, we provide the right solution for your system requirements.
Types Available:Two-way and three-way Brass Ball Valves
Male x Female, Female x Female, and compression ends
Lever handle or butterfly handle options
Lockable and mini ball valve versions
High-quality manufacturing with ISO compliance
Competitive pricing and reliable availability
Customizable options to suit any piping system
Trusted supplier of Brass Ball Valves across India and export markets
For strong, dependable, and maintenance-free Brass Ball Valves, trust Chamunda Engineering Solutions – your reliable partner for superior flow control products.
Additional Information:
Product Details:
| Minimum Order Quantity | 1000 Piece |
| Valve Size | 1/2 inch |
| Material | BRASS |
| Pressure | 10 KG |
| Connector Type | Screwed |
| Media | Air |
| End Connection | SCREW |
| Style | ROUND |
| Port Size | 1/2" |
| WOG Rating | 150 |
| Temperature Of Media | Medium Temperature |
Mini Ball Valve – Compact & Reliable Flow Control by Chamunda Engineering Solutions
Chamunda Engineering Solutions offers a premium selection of Mini Ball Valves designed for compact installations where space is limited but reliable shut-off is essential. These valves are ideal for low to medium pressure applications involving air, water, gas, fuel, and other non-corrosive fluids.
Crafted from high-quality materials such as Brass, Stainless Steel, and Nickel-Plated Brass, our Mini Ball Valves offer long-lasting performance, smooth operation, and leak-proof sealing in compact piping systems.
Key Features:Compact design for space-saving installations
1/4-turn operation for quick shut-off/on
Sizes available: 1/8” to 1” BSP/NPT
Body materials: Brass, SS 304, SS 316
PTFE seats and seals for leak-free performance
Corrosion-resistant and maintenance-free
Pneumatic control systems
Air compressor lines
Fuel and gas pipelines
Laboratory and instrumentation equipment
Domestic water supply and plumbing
Chamunda Engineering Solutions ensures every Mini Ball Valve is tested for pressure resistance, durability, and precision. Whether used in industrial equipment or residential setups, our valves are engineered for long service life and dependable flow control.
Why Choose Chamunda Engineering Solutions?High-quality material and precision-machined components
ISO-certified manufacturing standards
Custom options available for end connections and body type
Trusted supplier of Mini Ball Valves across India and export markets
For compact, durable, and efficient Mini Ball Valves, choose Chamunda Engineering Solutions – your reliable partner in high-quality flow control solutions.
Additional Information:
Product Details:
| Minimum Order Quantity | 500 Piece |
| Material | Brass |
| Material Grade | SS 302 |
| Size | 16 mm |
| Usage/Application | Structure Pipe |
| Connection | Male |
| Color | BLUE |
| Packaging Type | BOX |
| Connector Type | BSP |
| Design | YES |
| Model Name/Number | OC CONNECTOR |
| Country of Origin | Made in India |
Additional Information:
Product Details:
| Minimum Order Quantity | 300 Piece |
| Valve Size | 1.0 inch |
| Material | Brass |
| Pressure | 16 KG |
| Design | INDUATRIAL |
| Usage/Application | Gas |
| Color | BRAS GOLDEN |
| End Connection | THREAD |
| Finish | METAL |
| Packaging Type | YES |
| Temperature | 180 |
| Port Size | 1/2" |
| Seat Type | EPDM |
| Certification | NO |
| Power | YES |
| Thickness | MATE |
| Features | Q |
Additional Information:
Product Details:
| Minimum Order Quantity | 200 Piece |
| Size | 1/2 inch (15 mm) |
| Material | Brass |
| End Connection | Screwed |
| Pressure Rating | PN 25 |
| Valve Design | 1-Piece |
| Brand | CESON |
| Handle Type | Lever Handle |
| Seat Material | PTFE |
Additional Information:
Product Details:
| Minimum Order Quantity | 100 Piece |
| Material | Stainless Steel |
| End Connection Type | Screwed |
| Size | 15 mm |
| Valve Size | 1/4" |
| Connector Type | Thread |
| Pressure | 10 Kg |
| Usage/Application | Water |
| Brand | Ceson |
| Temperature of Media | Medium Temperature |
| Steel Grade | SS 303 |
| Country of Origin | Made in India |
Product Details:
| Minimum Order Quantity | 25 Piece |
| Actuator Type | Double Acting |
| Body Material | Stainless Steel |
| Automation Grade | Semi-Automatic |
| End Connection | Flanged |
| Pressure | Low Pressure |
| Air Supply Pressure | 5–7 bar |
| Usage/Application | Industrial |
| Bore Type | Full Bore |
| Brand | Ceson |
| Packaging Type | Box |
| Media | Water |
| Material | Stainless Steel |
| Valve Size | 2 inch |
| Port Size | 1 inch |
actuator ball valve
iso 5211pneumatic actuator opreted 3pc 2 way ball valve
body :- cf8/cf8m
ball:- cf8/cf8m
design :- 3 pc
seat :- ptfe
leakage class :- class vi
pneumatic pressar :- 4 bar
temperature :- 180
ends :- screw / flanged
media :- air ,water,gas,steam,chemicals
Product Details:
| Minimum Order Quantity | 50 Piece |
| Body Material | Stainless Steel (SS) |
| Pressure Class | Class 150 |
| Size | 1/4 Inch |
| Valve Design | 1-Piece |
| Bore Type | Full Bore |
| Operation | Lever Operated |
| Connector Type | Thread |
| Pressure | Medium Pressure |
| Model Number | BV |
| Seat Material | NBR |
| End Connection Standard | ASME B16.5 |
| Ball Material | Stainless Steel 304 |
| WOG Rating | 300 |
| Design | Round Cut |
| Packaging Type | Box |
| Brand | Ceson |
| Country of Origin | Made in India |
Chamunda Engineering Solutions offers a wide range of high-quality Brass Ball Valves, designed for smooth and reliable control of water, air, gas, and other non-corrosive fluids. These valves are widely used in residential, commercial, and industrial applications due to their strength, compact design, and excellent resistance to pressure and temperature.
Manufactured using premium-grade forged or cast brass, our Brass Ball Valves ensure tight shut-off, long service life, and maintenance-free performance in both low- and high-pressure systems.
Key Features:Full bore and reduced bore designs available
Corrosion-resistant brass body with chrome-plated ball
Easy quarter-turn operation for quick shut-off
Leak-proof PTFE seats and seals
Sizes: 1/4” to 4” (DN8 to DN100)
Working pressure: Up to 600 PSI
Suitable for water, oil, air, gas, and general-purpose applications
Plumbing and water supply systems
Compressed air systems
Fuel and gas pipelines
HVAC and industrial automation
Agricultural irrigation setups
Chamunda Engineering Solutions ensures every Brass Ball Valve undergoes strict quality checks for durability, pressure testing, and leakage prevention. Whether you need threaded, flanged, or compression-type connections, we provide the right solution for your system requirements.
Types Available:Two-way and three-way Brass Ball Valves
Male x Female, Female x Female, and compression ends
Lever handle or butterfly handle options
Lockable and mini ball valve versions
High-quality manufacturing with ISO compliance
Competitive pricing and reliable availability
Customizable options to suit any piping system
Trusted supplier of Brass Ball Valves across India and export markets
For strong, dependable, and maintenance-free Brass Ball Valves, trust Chamunda Engineering Solutions – your reliable partner for superior flow control products.
Product Details:
| Minimum Order Quantity | 10 Piece |
| Valve Size | 2 inch |
| Usage/Application | Industrial |
| Model Number/Name | FBV |
| Material | Stainless Steel |
| Pressure | Medium Pressure |
| Model Number | FLV |
| Brand | Ceson |
| Temperature of Media | Medium Temperature |
| Country of Origin | Made in India |